SECTION II OPERATOR, CREW PREVENTIVE MAINTENANCE CHECKS AND SERVICES
ITEM TO BE INSPECTED
EQUIPMENT IS NOT READY/
PROCEDURE: CHECK FOR AND HAVE REPAIRED, FILLED OR
ADJUSTED AS NEEDED
Perform weekly as well as before PMC's if:
a. You are the assigned drive but have not operated the vehicle
since the last weekly.
b. You are operating the vehicle for the first time.
Make the Following walk around checks.
EXTERIOR OF VEHICLE
a. Check tires for uneven wear, cuts, cracks, imbedded foreign
Tire has cuts or abrasions
objects and improper inflation.
which would result in tire
failure during operation. On
b. Check for proper inflation (See load and inflation chart on
or more tires missing or
Use the lowest possible tire pressure to do the job. Also see page
of information package in this SOMARPI.
c. Check for evidence of leakage (oil, fuel, hydraulic fluid or
Class III leaks or any fuel
coolant) on or under vehicle.
d. Check for obvious body, cab, undercarriage and component
damage, loose or missing parts.