TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b. If wire terminal (7) is corroded, unscrew and take off nut (6) and 18
wire (5) from glow plug circuit breaker terminal (1) using 3/8-inch
open-end wrench. Pull wire connector (8) off input terminal (3) on
GLOW PLUG ON/OFF switch (4) and clean wire terminal (7) and wire
connector (8) using wire brush. Go to step 14.
c. If 18 wire (5) is frayed or broken, repair (page 2-424).
d. If 18 wire (5) is not loose, corroded, frayed, or broken, go to
step 14.
TA243753
2-55