ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
Check engine OIL PRESSURE gage (6) reading as follows: Rotate KEY SWITCH (2) clockwise
to on position and press ENGINE START button (3) for 20 seconds. Check for reading above 10
psi on engine OIL PRESSURE gage (6). Rotate KEY SWITCH (2) counterclockwise to off
If engine OIL PRESSURE gage (1) reading is below 10 psi, check engine oil level
(TM 5-3805-254-10). If engine oil level is at proper level, notify Direct Support
If engine OIL PRESSURE gage (1) reading is above 10 psi, go to step 10.