ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
If socket (8) is corroded, clean using emery cloth. Put backup lamp (5) into socket
(8), alining pins with slots. Push in, turn clockwise and release. Put lens (4) into
stoplight/taillight assembly (1). Screw in four screws (3) and tighten using number
one cross-tip screwdriver.
If backup lamp socket (8) is rusted out, replace stoplight taillight assembly (1) (page
2-788 or page 2-791).
If backup lamp socket is not corroded or rusted out, go to step 7.