TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b. If multimeter reads 0 ohms, put turn signal lamp (1) into socket (7),
alining pins with slots. Push in and turn clockwise and release. Put
red lens (4) into rear of front turn signal assembly (9) and put amber
lens (3) into front of front turn signal assembly (9). Screw in eight
screws (2) and tighten, using number one cross-tip screwdriver.
Go to step 8.
2-261