TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Connect red test lead to terminal (1) and black test lead to terminal (4) on stoplight switch (2). Push brake
pedal (5) down. Check for 11 to 13 vdc on multimeter. Release brake pedal (5). Disconnect test leads.
a. If multimeter reads no continuity, replace stoplight switch (2) (page 2-664).
b. If multimeter reads 0 ohms, go to step 4.
TA243873
2-275