ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
b.If multimeter reads 0 ohms, install lamp (3). Put lamp (3) in lamp socket (1). Push
in, turn clockwise and release. Push lamp socket (1) into oil pressure/water
temperature indicator (2) and go to step 4.
Step 4.Using multimeter, set to ohms scale and adjust to 0 ohms. Connect red test lead to lamp
socket (1) and black test lead to ground stud (11). Check for 0 ohms on multimeter. Disconnect
If multimeter reads no continuity, 11 wire (12) must be replaced. Notify Direct Support