TM 5-3805-254-20-1
ACCELERATOR CONTROL ROD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
18.
New lockwasher (5)
Screw on and tighten using 7/16-inch and
and nut (6)
1/2-inch open-end wrenches.
NOTE
Throttle lever and accelerator control rod must aline to reach maximum engine
rpm.
19. Throttle lever (7)
Accelerator control
a.
Put machine bolt in accelerator control
rod (1) and machine rod.
bolt (8)
b.
Push throttle lever toward rear of truck
and hold in position.
c.
Aline threaded end of machine bolt with
hole in throttle lever and put in.
If threaded end of machine bolt and
hole in throttle lever do not aline go to
step 20.
If threaded end of machine bolt and
hole in throttle lever aline go to
step 22.
2-555