MUFFLER AND RAIN CAP - CONTINUED
Dry-cleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and
gloves and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes
and do not breathe vapors. Do not use near open flame or excessive heat. The flashpoint
for type #1 drycleaning solvent is 100°F (380C) and for type #2 is 138°F (590C). If you
become dizzy while using cleaning solvent, get fresh air immediately, and get medical aid.
If contact with eyes is made, flush your eyes with water and get medical aid immediately.
Safety goggles must be worn when using wire brush. Flying rust and metal particles could
cause eye injury.
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
Using wire brush, remove any rust.
Clean in dry-cleaning solvent.
Using clean dry rags, wipe dry.
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions