WATER PUMP BELT ADJUSTMENT
Extension, 6-inch, 1/2-inch drive
Gage, belt tension, 30 to 180 lb
(130 to 800 N.m)
Handle, ratchet, 1/2-inch drive
Socket, 7/8-inch, 1/2-inch drive
Left side hood panel opened (page 2-424).
Wrench, open-end, 1 1/16-inch
Water pump (1)
Using 1 1/16-inch open-end wrench,
Do not overtighten adjusting screw. Damage to water pump and idler pulley could occur.
Adjusting screw (3)
Using 7/8-inch, 1/2-inch drive socket, 6-
inch extension, ratchet handle, and belt
tension gage, turn clockwise, tightening
idler pulley adjusting screw, to adjust idler
pulley to obtain 120 to 140 pounds (162.7
to 189.8 N.m) belt tension.
Tighten using 1 1/16-inch open-end