RADIATOR HOSE -CONTINUED
REMOVAL - CONTINUED
Using 1 1/8-inch open-end wrench, unscrew, and
Using 1 3/8-inch open-end wrench, unscrew, and
For more information on how to clean parts, go to General Maintenance instruction (page 2-424).
All rubber hoses
Clean with solution of liquid detergent and water.
Rinse in clean water.
Using clean, dry rags, wipe dry.
Dry cleaning solvent p-d-680 is toxic and flammable. Wear protective safety goggles and gloves
and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not
breathe vapors. Do not use near open flame or excessive heat. The flashpoint for type # 1 dry-
cleaning solvent is 100°F (38°C)and for type #2 is 138°F(59°C). If you become dizzy while using
cleaning solvent, get fresh air immediately, and get medical aid. If contact with eyes is made, flush
your eyes with water and get medical aid immediately.
All metal parts
Clean with dry-cleaning solvent and wiping rag.
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instruction (page 2-424).
Elbow (4), elbow (2)
Look for cracks, breaks, or corrosion.
and reducer (1)
Check for cracks, breaks, chafing, or hardness.
Look for cracks and breaks.
All threaded parts
Look for damaged threads or rounded heads.
Change 1 2-651.2