ENGINE FULL-FLOW OIL FILTER - CONTINUED
a. Start engine and allow to reach operating
temperature (TM 5-3805-254-10).
b. Shut down engine
Dipstick tube (10)
a. Take out and clean with wiping rag.
b. Push in as far as possible.
c. Pull out and check oil level.
Oil level should be between H and L
marks on dipstick. If not
between H and L, add oil.
d. Put in.
FOLLOW-ON MAINTENANCE: Close right and left side hood panels (page 2-424).
TASK ENDS HERE