ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
B - Before
S - Semiannually
A - Annually
B - Biennially
H - Hours
M - Miles
ITEM TO BE INSPECTED
PROCEDURE: Check for and have repaired,
filled, adjusted as needed
Drain and fill transmission (page 2-900).
Replace internal oil filter (page 2-907).
Replace remote oil filter (page 2-935).
Check auxiliary transmission oil level (page 2-932).
Drain and fill auxiliary transmission (page 2-932).
Check interaxle differential oil level (page 2-945).
Drain and fill interaxle differential (page 2-945).
REAR AXLE ASSEMBLIES
Check rear axle assembly oil level (page 2-940).
Drain and fill rear axle assembly (page 2-940).
REAR AXLE ASSEMBLY BREATHERS
Remove and check for clogged rear axle assembly breathers
If clogged, clean or replace (page 2-940).
REAR AXLE ASSEMBLY WHEEL BEARINGS
Clean, inspect, lubricate, and adjust rear axle assembly wheel
bearings (page 2-1188).
Replace rear axle assembly wheel bearings if damaged or
defective (page 2-1188).
*On condition (OC) oil sample intervals shall be applied unless changed by the Army Oil Analysis Program (AOAP)
laboratory (TM 9-2300-422-23&P and L05-2805-254-12).