BATTERY BOX - CONTINUED
DISASSEMBLY - CONTINUED
Four nuts (2), four
Using 1/2-inch open-end wrench, un-
lockwashers (3), and
screw and take off.
upper step (4)
Get rid of lockwashers.
Take off upper step.
Four screws (5), two
Using 3/8-inch box-end wrench and
plates (6), four nuts
114-inch flat-tip screwdriver, unscrew
(7), and two hooks (8)
b. and take off.
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves and use
only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not breathe vapors. Do
not use near open flame or excessive heat. The flashpoint for type #1 drycleaning solvent is 1000F
(380C) and for type #2 is 138°F (590C). If you become dizzy while using cleaning solvent, get fresh air
immediately, and get medical aid. If contact with eyes is made, flush your eyes with water and get
medical aid immediately.