BATTERY BOX - CONTINUED
If battery box mounting brackets were removed perform steps 30 and 31.
Step 30 is for front bracket only.
Frame rail (10)
Two screws (11),
front bracket (12),
Screw on and tighten, using 314-inch
and two nuts (13)
box-end wrench and 3/4-inch open-end
Step 31 is typical for both center and rear brackets.
Six screws (14),
center bracket (15),
Screw on and tighten, using 3/4-inch
rear bracket (16),
box-end wrench and 314-inch open-end
and six nuts (17)