TRANSMISSION SHIFT CABLE - CONTINUED
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves
and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not
breathe vapors. Do not use near open flame or excessive heat. The flashpoint for type #1
drycleaning solvent is 1000F (380C) and for type #2 is 138°F (590C). If you become dizzy while
using cleaning solvent, get fresh air immediately, and get medical aid. If contact with eyes is
made, flush your eyes with water and get medical aid immediately.
For more information on how to clean parts, go to General Maintenance Instructions (page
All metal parts
Clean using drycleaning solvent and wiping
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions
Look for cracks or breaks.
All threaded parts
Look for damaged threads or rounded
Jamnut (3) and shift
shift cable (2)
cable swivel (4)
Allow two threads to stick out from top
of shift cable swivel.
Tighten using 12-inch slip-joint pliers
and 7/16-inch open-end wrench.