REAR RELAY VALVE TO REAR REAR QUICK RELEASE VALVE HOSE - CONTINUED
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
Clean using liquid detergent and wiping rag.
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
Check for cracks, breaks, chafing, or
Look for excessive rust or corrosion.
All threaded parts
Look for damaged threads or rounded
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-
Rear rear quick
90-degree elbow (2) and
Wrap pipe threads with antiseizing tape.
release valve (1)
Adapter (2.1), 90-degree
Screw on and tighten using 7/8-inch open-
elbow (2), and line nut (3)
Change 1 2-1142