FRONT HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED
Steps given are typical for right and left front hubs.
Front hub (1) and
Coat spindle with lubricating oil.
With assistance, put on.
Make sure inner bearing is seated on
inner race (7) on spindle.
Outer bearing (8)
Soak outer bearing and coat outer bear-
ing cup (9) and inner race (7) on
spindle with lubricating oil
Washer (10) and
Put on washer.
adjusting nut (11)
Screw on adjusting nut until snug.