PUMP-TO-LEFT STEERING GEAR HOSE AND FITTINGS - CONTINUED
CLEANING - CONTINUED
Particles blown by compressed air are hazardous Make certain the air stream is directed away from user and
other personnel in the area Compressed air used for cleaning purposes shall not exceed 30 psi (207 kPa)
User must wear safety goggles or face shield to prevent injury to personnel.
Elbow (1), hose (2),
Using air blow gun and air hose assembly,
elbow (3), and
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions
Elbow (1) and
Look for bends, dents, or cracks.
Look for worn areas or gouges.
All threaded parts
Look for damaged threads or rounded
New ring (5)
Elbow (1) and new
Screw on and tighten using two 718-inch
Screw on and tighten using two 7/8-inch
Wrap pipe threads with antiseizing tape
Screw in and tighten using 13/16-inch