Section XVII. FRAME AND TOWING ATTACHMENT MAINTENANCE
This task covers:
Removal (page 2-1248)
Installation (page 2-1249)
Extension, 6-inch, 1/2-inch drive
Handle, ratchet, 1/2-inch drive
Socket, 1 118-inch, 1/2-inch drive
Wrench, box-end, 1 1/8-inch
Parking brake engaged (TM 5-3805-254-10)
Wrench, torque, 0-300 ft lb
(0 to 420 Nm), 1/2-inch drive
Lockwasher, pintle hook (four required)
Due to excessive weight, assistance will be needed to lift and remove pintle hook
assembly from rear chassis cross-member. Serious injury to personnel could result.
Safety goggles must be worn when working under truck to prevent eye injury.
Four screws (2),
Using 1/2-inch drive 6-inch extension,
four nuts (3), and
ratchet handle, 1 1/8-inch socket and
four lockwashers (4)
1 1/8-inch box-end wrench, with
assistance, unscrew and take off.
Get rid of lockwashers.
Pintle hook (5)
With assistance, take off.