TM 5-3805-254-20-2
HEATER CORE HOSES
This task covers:
a.
Removal (page 2-1305)
c.
Inspection/Replacement (page 2-1312)
b.
Cleaning (page 2-1311)
d.
Installation (page 2-1313)
INITIAL SETUP
Tools
Materials/Parts - Continued
Gloves, safety
Lockwasher, clamp under cab floor
Goggles, safety
Lockwasher, stud, inner fender well
Pliers, slip-joint, 8-inch
Rags, wiping (item 15, appendix C)
Screwdriver, flat-tip, 1/4-inch
Solvent, drycleaning (item 19, appendix C)
Wrench, box-end, 7/16-inch (two
required)
Personnel Required
Wrench, box-end, 1/2-inch
One
Materials/Parts
Equipment Condition
Detergent, liquid, GP (item 7,
appendix C)
Right side hood panel opened (page 2-424).
Lockwasher, clamp support bracket
Cooling system drained (page 2-628).
2-1304