WATER TEMPERATURE GAGE AND LINE - CONTINUED
Use care when working behind upper center instrument panel to prevent breaking or disconnecting wires.
Make sure water temperature gage is not disconnected from line Damage to gage will occur.
Light socket (2)
Two nuts (3) and
Using 3/8-inch open-end wrench, un-
two lockwashers (4)
screw and take off.
Get rid of lockwashers.
Mounting bracket (5)
Engine side of
Using 6-inch diagonal-cutting pliers,
firewall (6) and
Get rid of strap.
Using 5/8-inch and 7/8-inch open-end
wrenches, unscrew and slide back.