AUXILIARY TRANSMISSION TOP COVER MAINTENANCE (Cont).
CLEANING AND INSPECTION
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and gloves, and
use only In a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOT breathe
vapors. DO NOT use near open flame or excessive heat. The solvent's flash point Is 100°F-138°F
(380C-590C). If you become dizzy while using cleaning solvent, Immediately get fresh air and medical
help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
Clean interior metal parts with dry cleaning solvent.
Clean exterior of housing with dry cleaning solvent or steam. Dry thoroughly.
Inspect metal parts for cracks, breaks, wear, and other damage. Replace if damaged.
Apply sealant compound to outer diameter of two new oil seals (12) and press oil seals into housing (3).
Install new spring (18), new plunger (19), and new ball (20).
Apply thin coat of grease to surface of shift bar (6) and install shift bar with three notches facing ball (20).