TORQUE CONVERTER COOLER MAINTENANCE.
This Task Covers:
c. Cleaning and Inspection
Hood removed (see TM 5-3805-254-20).
Sealant compound (Item 19, Appendix B)
Thermostat removed (see TM 5-3805-254-20).
Dry cleaning solvent (Item 23, Appendix B)
Radiator bypass coolant line removed (see TM 5-
Front water manifold hose removed (see TM 5-3805-
Personnel Required: Two
General Safety Instructions:
General mechanics tool kit
Field automotive shop set
Dry cleaning solvent is flammable and must not be
used near open flame. Use only In a well-ventilated
Torque converter cooler is heavy. DO NOT remove nuts and screws unless auxiliary transmission Is
supported. Failure to follow this warning may result in Injury or death to personnel.
Remove plug (3) and drain torque converter cooler (1).
Remove four nuts (5), lockwashers (4), screws (2), and torque converter cooler (1) from support (6). Discard