TORQUE CONVERTER COOLER MAINTENANCE (Cont).
Remove four screws (22), lockwashers (23), bonnet (24), and gasket (25) from torque converter cooler (1). Discard
lockwashers and gasket.
CLEANING AND INSPECTION I
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and gloves, and
use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOT breathe
vapors. DO NOT use near open flame or excessive heat. The solvent's flash point Is 100°F-138°F (38°C-
590C). If you become dizzy while using cleaning solvent, Immediately get fresh air and medical help. If
solvent contacts eyes, Immediately wash your eyes and get medical aid.
Clean metal parts with dry cleaning solvent.
Inspect metal parts for cracks, breaks, and other damage. Replace if damaged.
Apply thin coat of sealant compound to both sides of new gasket (25).
Install gasket (25) and bonnet (24) to torque converter cooler (1) with four new lockwashers (23) and screws (22).