INSTALL AND REMOVE TRANSMISSION FROM OVERHAUL STAND.
This Task Covers:
Transmission removed from vehicle (see paragraph
Personnel Required: Two
General mechanics tool kit
Field automotive shop set
Transmission holding fixture
Bolts must be removed now, In order to allow separation of torque
converter housing from transmission housing In paragraph 6-11.
Remove two bolts (2) and lockwashers (3) from each side of transmission (1). Discard lockwashers.
Install transmission holding fixture (9) to transmission (1) with four bolts (4) and nuts (8).
Attach overhead lifting device to transmission holding fixture (9).