TM 5-3805-254-34
6-10. FLYWHEEL REPLACEMENT (Cont).
4.
Measure Inner bore (20) of flywheel (12). If
diameter is greater than 1.007 in. (2.558 cm),
replace flywheel.
5.
Apply thin coat of hydraulic fluid to surfaces of
metal parts, preformed packing, and seal ring.
c.
INSTALLATIONI
1.
Install new preformed packing (19) to hub of
flywheel (12).
2.
Install new gasket (17) into outer groove of
lockup clutch piston (18).
3.
Install lockup clutch piston (18) into flywheel
(12). Ensure that dowel pins of flywheel aline
with holes of lockup clutch piston.
4.
Install lockup clutch disk (16).
6-68