LOW RING GEAR AND LOW CLUTCH REPLACEMENT (Cont).
Apply thin coat of hydraulic fluid to surface of all
metal parts Including clutch plates (1 and 5) and
clutch disks (2).
Place low ring gear (3) on work surface with flat side
of low ring gear facing downward.
Beginning with one clutch disk (2), alternately install
five clutch disks and five clutch plates (5) on low ring
While holding clutch disks (2), clutch plates (5), and
low ring gear (3) together as an assembly, turn
assembly over and install in adapter housing (4).
Install thick clutch plate (1), clutch disk (2), and thick
clutch plate (1) into adapter housing (4).
Install low planetary carrier (see paragraph 6-20).