REAR-REAR DIFFERENTIAL MAINTENANCE (Cont).
Scribe a line on each half of differential case (18) and driven gear (19) to ensure that assembly is in the same
Cut lockwire and remove 12 bolts (20) and nuts (21) from differential case (18) halves and driven gear (19).
Remove one-half of differential case (18).
No-spin differential is available as an assembly only. There are no repair parts available. If a part
of the differential Is damaged, replace complete no-spin differential assembly.
Remove no-spin differential assembly (14) from differential case (18) half.
If damaged, remove two bearing races (10), differential case bearings (17), and spacers (16).
Perform steps 14 through 17 only if disassembly of no-spin differential Is required for
Install no-spin differential assembly (14) in arbor press.