TM 5-3805-254-34
10-3.
AIR COMPRESSOR REPAIR (Cont).
NOTE
Perform steps 11 through 17 for each of
two pistons.
11.
Bend tabs of two keywashers (43) and remove
bolts (44), keywashers, and connecting rod half
(45) from connecting rod half (40). Discard
keywashers.
NOTE
Note position of piston on block for
assembly.
Piston must be Installed In same hole.
12.
Tap piston (39) assembly from top of block (1).
NOTE
If replacing one bearing, other bearing
must also be replaced.
13.
If scored, corroded, or damaged, remove
bearings (41 and 42) from connecting rod halves
(40 and 45) and discard.
14.
Remove wire (47) from piston (39) and pin (49).
15.
Remove pin (49) and connecting rod half (40)
from piston (39).
16.
If damaged, remove bushing (48) from
connecting rod half (40) and discard.
TA704001
10-12