13-2. FRONT SPRINGS REPLACEMENT (Cont).
CLEANING AND INSPECTION
Dry cleaning solvent, P-D-680, Is toxic and flammable. Always wear protective
goggles and gloves, and use only In a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame or
excessive heat. The solvent's flash point Is 100°F-138°F (380C-590C). If you become
dizzy while using cleaning solvent, Immediately get fresh air and medical help. If
solvent contacts eyes, Immediately wash your eyes and get medical aid.
Clean metal parts with dry cleaning solvent.
Inspect metal parts for cracks, breaks, wear, corrosion, and other damage. Replace if damaged.
Inspect front spring leafs for cracks, breaks, and distortion. Replace front springs if damaged.