TAILGATE RELEASE LEVER AND LINKAGE REPLACEMENT (Cont).
Remove lever (14) from roller rod (29) and dump body.
With assistance, remove roller rod (29) from crank (26) and dump body.
CLEANING AND INSPECTION
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and
gloves, and use only In a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO
NOT breathe vapors. DO NOT use near open flame or excessive heat. The solvents flash point is
1000F-1380F (380C-590C). If you become dizzy while using cleaning solvent, Immediately get
fresh air and medical help. If solvent contacts eyes, Immediately wash your eyes and get medical
Clean parts with dry cleaning solvent.
Inspect parts for wear, bends, breaks, or corrosion. Replace parts if damaged.
Install roller rod (29) through crossmembers and position in crank (26).
Position lever (14) on roller rod (29) and dump body.