DRIVERS SEAT REPAIR (Cont).
Remove four nuts (55) and washers (56) from riser (54).
Remove seat adjuster (16) and four spacers (53) from riser (54).
CLEANING AND INSPECTION
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and
gloves, and use only In a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO
NOT breathe vapors. DO NOT use near open flame or excessive heat. The solvents flash point is
100°F-138°F (380C-590C). If you become dizzy while using cleaning solvent, Immediately get fresh
air and medical help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
Clean metal parts with dry cleaning solvent.
Inspect metal parts for cracks, breaks, corrosion, and other damage. Replace damaged parts.
Inspect lubrication fittings for damage. Replace if damaged.
Aline seat adjuster (16) and four spacers (53) with riser (54) and install four washers (56) and nuts (55).
Install two rubber bushings (52) on seat (33).
Install two pins (51), washers (50), rollers (49), and retaining rings (48) to seat (33).
Install ride indicator (47) and two bushings (46) to seat (33).