TM 5-3805-264-13&P
0032
REMOVAL
NOTE
Wires should be tagged before disconnecting (WP 0072).
Note location of tiedown straps and routing of wiring harness prior to removal to
aid in installation.
1.
Remove two wiring harness terminal leads from backup alarm (TM 9-2320-363-20-1, TM 9-2320-363-20-2,
TM 9-2320-302-20-1, or TM 9-2320-302-20-2).
2.
Remove taillight from each side of dump body and disconnect wiring harness (WP 0026).
3.
Remove marker clearance light from each side of dump body and disconnect wiring harness (WP 0027).
4.
Disconnect wiring harness leads (Figure 1, Item 2) from three marker clearance lights (Figure 1, Item 3) at
rear hinge light bracket (Figure 1, Item 7).
5.
Disconnect wiring harness connector (Figure 1, Item 5) from chassis wiring harness connector
(Figure 1, Item 6) and remove wiring harness (Figure 1, Item 4) from dump body (Figure 1, Item 1).
END OF TASK
REPAIR
NOTE
Wiring harness need not be removed from vehicle to make repairs.
Repair wiring harness in accordance with General Maintenance Instructions (WP 0072).
END OF TASK
INSTALLATION
1.
Position wiring harness (Figure 1, Item 4) between points of connection, routing it along channels and
openings in dump body (Figure 1, Item 1).
2.
Connect wiring harness connector (Figure 1, Item 5) to chassis wiring harness connector (Figure 1, Item 6).
3.
Connect wiring harness leads (Figure 1, Item 2) to three marker clearance lights (Figure 1, Item 3) at rear
hinge light bracket (Figure 1, Item 7).
4.
Connect wiring harness to each taillight and install taillights (WP 0026).
5.
Connect wiring harness to marker clearance light on each side of dump body and install lights (WP 0027).
6.
Install two wiring harness terminal leads to backup alarm (TM 9-2320-363-20-1, TM 9-2320-363-20-2,
TM 9-2320-302-20-1, or TM 9-2320-302-20-2).
7.
Install new tiedown straps.
0032-2
03/15/2011Rel(1.10)root(maintwp)wpno(M1001326413)