4-43. MCS REMOTE CONTROL REPAIR (M917A1 W/MCS).
This task covers:
b. Cleaning and Inspection
* Marker tags (Item 19, Appendix F)
MCS remote control disconnected from MCS tail-
gate (paragraph 2-13).
l One gasket
General mechanics tool kit (Item 8, Appendix I)
Wires should be tagged and wire color noted before disconnecting (paragraph
Perform steps 1 thru 3 to disassemble plug-in connector.
Remove screw (4) screw (1), and clamp (2) from connector housing (3).
Pull connector (5) outward and remove seven screws (6) to remove connector and connector housing (3)
from wires of cable (8).
Remove jumper wire (7).