BODY UP AND TRANSPORT LOCK SWITCHES WIRING HARNESS MAINTE-
Disconnect two wiring harness leads (5) from body up switch (6).
Disconnect wiring harness connector (4) from chassis wiring harness connector (3) and remove wiring har-
Wiring harness need not be removed from vehicle to make repairs.
Repair wiring harness in accordance with instructions in Chapter 4, Section III, General Maintenance
Connect wiring harness connector (4) to chassis wiring harness connector (3).
Connect two wiring harness leads (5) to body up switch (6).
Connect transport lock switch connector (1) to wiring harness connector (2).
Secure wiring harness (7) with new tie wraps
Connect batteries (TM 9-2320-363-20).
Check operation of body up and transport lock switches (paragraph 2-1).