TAILGATE RELEASE AIR CYLINDER REPLACEMENT (Cont).
Install air cylinder (5) to dump body (1) with pin (2) and new cotter pin (9).
Ensure that position of nut at air cylinder piston shaft clevis is the same as noted
during removal, to ensure proper adjustment of air cylinder on installation.
Install air cylinder (5) to tailgate release lever (7) with pin (6) and new cotter pin (8).
Install two elbows (3) to air cylinder (5). Connect two air lines (4) to elbows.
Start engine and pressurize air system (TM 9-2320-363-10).
Remove body props and lower dump body (paragraph 2-15).
Set tailgate release control valve lever to LOCKED position (paragraph 2-1).