TAILGATE RELEASE/MCS AIR LINES AND FITTINGS REPLACEMENT (Cont).
If removing an air line, disconnect each end of air line (1) at fitting (2).
If removing a fitting, disconnect all air lines (1) from fitting (2).
CLEANING AND INSPECTION
Clean and inspect components in accordance with Chapter 4, Section III, Genera/ Maintenance Instruc-
For information on manufacturing air lines, refer to Appendix G, Illustrated List of
If installing a fitting, connect all air lines (1) to fitting (2).
If installing an air line. connect each end of air line (1) to fitting (2).
Install new tie wraps as required.
Start engine and pressurize air systems (TM 9-2320-363-10).
Operate tailgate release control valve lever or MCS gates (paragraph 2-1 or 2-13).
Check for leaks.
Install MCS tailgate cover, if removed (paragraph 4-53).