HYDRAULIC CYLINDER REPLACEMENT (Cont).
Use extreme caution when handling
heavy parts. Keep clear of heavy
parts supported only by Iifting
device. Failure to follow this wam-
ing may cause death or injury to
personnel or damage to equipment.
Install lifting sling through loop in hydraulic cyl-
inder (1) and attach lifting sling to lifting device.
Remove locknut (8) screw (10), and pivot pin
(9) from cylinder support frame (7) and hydrau-
lic cylinder (1). Discard locknut.
While holding hydraulic cylinder (1) securely,
remove six locknuts (2), screws (4), and left
and right mounting brackets (3 and 11) from
dump body (12). Discard locknuts.
Remove left and right mounting brackets (3 and 11) from hydraulic cylinder (1).
Use extreme caution when handling heavy parts. Keep clear of heavy parts sup-
ported only by lifting device. Failure to follow this warning may cause death or
injury to personnel or damage to equipment.
Hydraulic cylinder sleeves may extend downward as hydraulic cylinder is lifted.
Expect sleeve movement any time hydraulic cylinder is handled. Failure to do
so may result in serious injury to personnel.
Remove hydraulic cylinder (1) from vehicle. Move hydraulic cylinder to a safe work area.