HYDRAULIC CYLINDER REPAIR (Cont).
Using two small screwdrivers, remove bottom
retaining ring (31) from groove of barrel (25).
Position four hydraulic cylinder disassembly
tools, equally spaced, between bottom retain-
ing ring and barrel.
Hydraulic cylinder disassembly
tools will fall free as sleeve, with
bottom retaining ring, is removed
Remove sleeve (14) from barrel (25). Remove
bottom retaining ring (31) from sleeve.
Remove wear ring (32) and two piston rings (33) from other end of sleeve (14). Discard wear ring.
If worn or damaged, remove two bushings (35) from barrel (25) and bushing (34) from plunger (1).