Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) for M917A1 and M917A1
w/MCS Body (Con't).
Not Fully Mission
a. With engine off and dump body Iow-
ered, check sight tube (18) to deter-
mine level of hydraulic oil in reservoir
(21). Level should be even with FULL
mark on oil level decal (20). If level is
low, remove fill cap (19). Remove any
debris from strainer with a clean rag.
Add oil (Item 12 or 13, Appendix F)
through fill cap opening until level is
even with FULL mark on decal. Install
fill cap (Chapter 3, Section I).