INTRODUCTION - CONTINUED
C Crew maintenance
F Maintainer maintenance
L Specialized Repair Activity (SRA)
H Below depot maintenance
D Depot maintenance
The "L" maintenance level is not included in column (4) of the
MAC. Functions to this level of maintenance are identified by work
time figure in the "H" column of column (4), and an associated
reference code is used in the REMARKS column (6). This code is
keyed to the remarks and the SRA complete repair application is
Column (5) Tools and Equipment Reference Code. Column (5) specifies, by code, those common tool sets (not
individual tools), common Test, Measurement and Diagnostic Equipment (TMDE), and special tools, special
TMDE and special support equipment required to perform the designated function. Codes are keyed to the
entries in the tools and test equipment table.
Column (6) Remarks Code. When applicable, this column contains a letter code, in alphabetical order, which
is keyed to the remarks table entries.
Explanation of Columns in the Tools and Test Equipment Requirements
Column (1) - Tool or Test Equipment Reference Code. The tool or test equipment reference code correlates
with a code used in column (5) of the MAC.
Column (2) - Maintenance Level. The lowest level of maintenance authorized to use the tool or test
Column (3) - Nomenclature. Name or identification of the tool or test equipment.
Column (4) - National Stock Number (NSN). The NSN of the tool or test equipment.
Column (5) - Tool Number. The manufacturer's part number.
Explanation of Columns in the Remarks
Column (1) - Remarks Code. The code recorded in column (6) of the MAC.
Column (2) - Remarks. This column lists information pertinent to the maintenance function being performed as
indicated in the MAC.
END OF WORK PACKAGE