TRUCK SERVICE MANUAL
SPRINGS
REMOVING EQUALIZER BEAM BUSHINGS
(With Equalizer Beam in Place on Vehicles)
Special tool equipment (SE-1931) is avail-
able which can be used to replace the equalizer
beam bushings without completely removing
the equalizer beam from the chassis. The
SE-1931 tool can also be used to replace the
bushings with the equalizer beams removed.
Operating instructions are furnished with the
equipment.
ADAPTER CHART
Adapters which can be made locally from standard tubing for removing and installing rubber
bushings. *Adapters to be used with sheave puller.
Adapter Size
Application
6.9 cm O.D x 7.6 cm Long
Torque Rod Bushing Remover
(2.75 in O.D x 3.0 in Long)
7.6 cm O.D x 7.6 cm Long*
Torque Rod Bushing Installer
(3.0 in O.D x 3.0 in Long)*
11.0 cm O.D x 10.2 cm Long
Equalizer Beam End Bushing Remover
(4.25 in O.D x 4.0 in Long)
11.4 cm O.D x 10.2 cm Long*
(4.5 in O.D x 4.0 in Long)*
Equalizer Beam End Bushing Installer
13.7 cm O.D x 25.4 cm Long
Equalizer Beam Center Sleeve Bushing
(5.38 in O.D x 10.0 in Long)
Remover and Installer RT-500
621
