TRUCK SERVICE MANUAL
MISCELLANEOUS
SIDE MOUNTED
POWER TAKE-OFFS
SAE SIX HOLE
SINGLE SPEED - TWO
Basic Model 26...For Heavy Duty Operation
26 Series P.T.O.'s are designed for heavy duty
applications.
The PTO is located on the top left
These units are designed with heavy duty tapered roller
side of the automatic transmission.
REMOVE AND REINSTALL
Standard features of these units include 1'4" round
output shaft and ten foot cable control. Lever control
To remove the PTO remove the cab floor mat and
shift is available as an option.
transmission floor cover. Disconnect oil supply line and
shift control. Then remove the six mounting bolts
Various assembly arrangements are available to enable
securing power-take-off to the automatic transmission.
flexibility of output shaft location.
The power-take-off is installed by reversing the
This unit features interchangeable Pump Mounting
removal procedure. When installing the PTO select
Flanges which may be adapted to a wide range of direct
proper mounting gaskets to obtain .006" to .012"
mounting hydraulic pumps.
backlash.
NOTE
The pump weight should not exceed 40 lbs.
Torque Rating ..................................250 lbs. ft.
500 RPM of Output Shaft..................24
1000 RPM of Output Shaft ...............48
Approximate Weight .........................28 lbs.
869