TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 26.
Turn manual override thumbscrew (4) on fuel solenoid (5) fully clockwise. Rotate KEY
SWITCH (6) clockwise to on position. Push GLOW PLUG ON/OFF switch (7) to ON
position. Wait 30 seconds, then pump preheater primer pump (3) until FUEL PRESSURE
gage (8) reads above 40 psi. Press ENGINE START button (9) for 15 seconds. Press
GLOW PLUG ON/OFF switch (7) to OFF position and rotate KEY SWITCH (6)
counterclockwise to off position.
If engine did not start, go to Malfunction 2, ENGINE CRANKS BUT FAILS TO START
ABOVE 50°F (18°C) (page 2-68).
2-67
