TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b.
If multimeter reads 0 ohms, put turn signal lamp (1) into
socket (7),
aligning pins with slots. Push in and turn clockwise and
release. Put
red lens (4) into rear of front turn signal assembly (9) and
amber
lens (3) into front of front turn signal assembly (9).
Screw in eight
screws (2) and tighten, using number one cross-tip
screwdriver.
Go to step 8.
2-233
