TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
57. TRANSMISSION DOES NOT SHIFT PROPERLY CONTINUED.
Step 7.
Check transmission shift cable (1) adjustment (page 2-924).
a. If transmission shift cable (1) is out of adjustment, adjust (page 2-924).
b. If transmission shift cable (1) is not out of adjustment, go to step 8.
Step 8.
Check accelerator linkage (2) for full travel as follows: Have assistant press accelerator pedal (3)
slowly to the floor then release.
a. If accelerator linkage (2) does not move full travel (page 2-446), notify Direct Support
Maintenance.
b. If accelerator linkage (2) does move full travel, go to step 9.
Step 9.
Check that transmission modulator (4) is connected. If transmission modulator is not connected,
notify Direct Support Maintenance.
2-320
