TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
64.
AIR PRESSURE DOES NOT EXCEED 90 PSI.
WARNING
Safety goggles must be worn when working with air lines to prevent personal injury.
Step 1. Check for clogged or restricted output line (3) on air compressor (4) as follows: using 1-inch open-
end wrench, unscrew and take off output line (3) at air compressor (4). Visually check for a
restricted opening or a build of carbon clogging the opening of the output line (3).
a.If output line (3) is clogged, bent, dented or broken, replace (page 2-1035).
b.If output line (3) is not clogged, bent, dented or broken, go to step 2.
TA243914
2-339
