TM 5-3805-254-20-1
AIR CLEANER HOUSING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
424).
20.
All metal and
Look for cracks and breaks.
plastic parts
21.
All rubber parts
Look for cracks, dry rot, and damaged
areas.
ASSEMBLY
WARNING
Metal edges of air cleaner housing are sharp. Care must be taken to prevent personal injury.
CAUTION
Fin ring is plastic and can break easily. Care must be taken to prevent damage when installing.
22.
Air cleaner
Fin ring (2)
Put in.
housing (1)
23.
New air filter
Put in.
element (3)
24.
Wingnut (4)
New gasket (5)
Put on.
25.
Air cleaner
Wingnut (4)
Screw on and tighten.
housing (1)
Air filter element should not rattle.
26.
Air cleaner cover
a.
Aline and put on.
(6) and three
b.
Connect clips and push down to lock.
clips (7)
2-458
