TM 5-3805-254-20-1
FUEL TANK VENT HOSES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
8.
Fuel tank
Screw (2), clamp
a.
Open clamp and put in vent hose.
support (1)
(3), vent hose (4),
b.
Screw on and tighten using 7/16-inch,
new lockwasher (5),
1/2-inch drive socket and ratchet han-
and nut (6)
die, and 9/16-inch box-end wrench.
9.
Top of fuel
Fitting (8)
Screw in and tighten using 7/16-inch open-
tank (7)
end wrench.
Position hose end of fitting toward
frame rail.
10.
Vent hose (4),
a.
Put clamp on hose.
fitting (8), and
b.
Put hose on fitting, using 6-inch slip-
clamp (9)
joint pliers.
c.
Put clamp on hose and fitting, and
tighten.
TASK ENDS HERE
2-522